Table des Matières
Publicité
Le script ras_install s'affiche. Indiquez les options suivantes :
. S pour l'agent esclave ;
. IP pour l'adresse de l'hôte de gestion ;
. C pour démarrer le cron de l'agent.
La sortie qui suit est un exemple de script ras_install :
+----------------------------------+
| Installing the Package and Crons |
+----------------------------------+
? Are you installing a Master or a Slave Agent? (Enter M=master, S=slave, E=Empty
Master)
[M/S/E]: (default=M) S
The address of the master must already be defined before a slave can be installed.
If the master has not been installed yet, abort this install and go install this
package on the host that was selected to be the master.
? Enter the IP Name/Address of the Master Host Agent 10.8.88.135
- Testing communication with host '10.8.88.135' ..
- Communication successful.
- Starting the Storage A.D.E service (rasserv):
/opt/SUNWstade/rasserv/bin/apachectl startssl: ./rasserv started
- Setting up crons:
? Do you want to C=start or P=stop the Agent cron
[C/P] : (default=C) C
- cron installed.
- Testing access to rasserv (this test will timeout after 4 tries of 10 secs):
- ping '10.8.88.135' succeeded!
- 1/4 attempting to contact agent service...
- Contacted agent with hostid=80cffc87.
+-------------------------------+
| SUNWstade installed properly |
+-------------------------------+
- Sending monitored device-list to agent at 10.8.88.135
-- diag-lsi1.Central.Sun.COM already there
OK
38
Notes de version de la baie de disques Sun StorEdge™ 6130 • janvier 2005
Publicité
Table des Matières
