Table des Matières
Publicité
52
6. Suivez les instructions ci-dessous pour remplacer l'orifice.
Remove the manifold gasket (note orientation - the larger side goes
a
downwards). REPLACE THE GASKET AFTER INSTALLING LP ORIFICE.
9/16" Wrench
d
Screw the LP orifice until orifice
protrudes 15/16" (23.8mm)
indicating full insertion (use
wrench to secure manifold when
re-attaching orifice).
7. Réinstallez le joint d'orifice qui a été retiré à l'étape 6.
© Travis Industries
Installation
(for qualified installers only)
1/2" Wrench
Rear
Orifice
Use a 9/16" wrench to secure the
b
manifold while removing the orifice
with a 1/2" wrench.
Apply thread sealant to the LP orifice prior
to installation. Use the chart below to
identify the correct orifices.
15/16"
23.8mm
Look here for the orifice identification
LP
1.65mm
4170530
c
NG
#36
The longer portion
of the gasket should
be at the bottom.
100-01455
Publicité
Table des Matières
