Table des Matières
Publicité
Installation
2. Retirez le cadre en verre en suivant les instructions ci-dessous.
Open the four latches holding the glass frame in place (start
a
with the bottom) - follow the directions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should
be parallel with the front of the fireplace when installed.
Replacement Glass Frame Part #
© Travis Industries
(for qualified installers only)
NOTE:
You may need to lift
the glass frame
while re-attaching.
270-01994
11/15/17 - 1464
Top of
Firebox
Latch
Catch
(on glass frame)
54 ProBuilder MV/GSB2
47
Glass
Publicité
Table des Matières
