Table des Matières
Publicité
26
Emplacement de la ligne de gaz
REMARQUE FOR RIGID PIPE: When using rigid pipe, you may wish to disconnect the shutoff valve from the
fireplace and route the pipe through the fireplace wall. First, disconnect the gas line from the shutoff valve.
Disconnect the shutoff valve from the cover plate (4 screws outside fireplace). The pipe may be routed through
the cover plate and the shutoff valve and gas line may be re-attached inside the fireplace.
Gas line may be plumbed from the left side (stock) or below. See illustration and table below to determine gas line location.
Left Side Gas Pass-Through Location (Stock)
Baseplate Gas Pass-Through Location*
a
b
Relocating the Gas Line to the Baseplate
1.
Élever le foyer environ 3 ".
2.
Retirez le knock-out dans l'emplacement souhaité (vous pouvez supprimer les deux knock-out si le routage électrique à
travers la base ainsi).
3.
Faites passer la conduite de gaz flexible (avec vanne d'arrêt) à l'emplacement souhaité.
© Travis Industries
Installation
(for qualified installers only)
a
b
6-1/4" (159mm)
2-1/2" (64mm)
11" (280mm)
27-1/4" (692mm)
a
4170530
b
100-01455
Publicité
Table des Matières
