Hypertherm Powermax350 Mode D'emploi page 9

3. Install the new moisture removal air filter (109302) onto the adapter with the arrow towards the power supply.
4. Reconnect the power and gas supply. See the Operator Manual for details.
Replace the air filter element
1. Disconnect the power and gas supply.
2. Remove the metal guard from the filter bowl.
a. Push down the thumb latch on the metal guard and twist the metal guard clockwise.
b. Pull the metal guard straight down to remove.
3. Remove the filter bowl by rotating the clear bowl counter-clockwise and pulling down on the bowl.
Powermax Legacy Systems Field Service Bulletin 809620
Optional Air Filter Kit and Element Replacement Procedure
a b
9