Hypertherm Powermax350 Mode D'emploi page 10

Optional Air Filter Kit and Element Replacement Procedure
4. Remove the old filter element by twisting the element counter-clockwise until it unscrews and detaches.
5. Vertically align the element screw hole
attaches securely.

Do not overtighten the filter element.
6. Push the top of the clear filter bowl up into the air filter until it comes to a stop and is seated evenly. Twist the bowl
clockwise to tighten.
7. Install the metal guard onto the filter bowl.
a. Align the black tabs
b. Push up on the metal guard and rotate the guard until it clicks into place.
8. Connect the power and gas supply.
10
with the screw
1
1
on the metal guard with the inlets
1
a
2
1
. Twist the filter element
2
2
on the air filter.
2
b
Powermax Legacy Systems Field Service Bulletin 809620
Old filter element (011092)
clockwise until the element
3
3