CAME PXC48 Manuel Installateur page 73

Sending via MMS
This function lets you send via MMS the first picture and the infor-
mation relating to the alarm event .
B
A Activate sending MMS with the information about the event .
B Select the type of configuration .
C Set the parameters required for configuration of MMS . See the
MMS configuration parameters on the SIM provider's website .
D Select the telephone numbers on which to receive the notifica-
tion via MMS .
Sending via Email
It is possible to enable sending emails with the information and
pictures relating to the alarm event to two targets .
B
A
4
A
B
D
A Activate the notification by email service .
B Select [Services] [Email] .
C Enter the name of the system in the [Sender] field and configure
the email address to receive notifications .
D Sending the email can be done through the CameConnect email
server, selecting [Email server] [CameConnect email], or you can
use another email server by selecting [Email server] [Select other
SMTP server] .
In this case refer to the email service provider's website for the
correct parameters needed for configuration .
C
C
D