Cameconnect; Videocheck; Introduction; Description Of Components Of The System - CAME PXC48 Manuel Installateur

CameConnect

Thanks to its connection to a central server, CameConnect puts on
line CAME DEVICES that can be managed and controlled from any
device connected to the Internet . The CameConnect site can be
found on the following URL: http://www .cameconnect .net
Registering PXGPRS module on CameConnect
Once the device is configured for connection to CameConnect, the
PXGPRS module must be registered to activate the remote man-
agement services:

Videocheck

INTRODUCTION

The VideoCheck system can detect the presence of people through
the use of IR technology, send the alarm message to the control
unit, take photographs of the areas and send them to the Came
Cloud so that they are available to the user .

DESCRIPTION OF COMPONENTS OF THE SYSTEM

The videocheck system is made up of the following devices:
1- PIR Camera sensor (PXWIRFC-PXWIRWFC):
The PIR camera sensor is the sensor that detects the presence of
people and sends the alarm message to the control unit, then takes
photographs of the areas and sends them to the GPRS module of
the security system .
The PIR camera system is available in the following versions:
- PIR 868 Camera (PXWIRFC): uses the RF868 radio to send alarm
notifications and pictures to the control unit;
- PIR WiFi Camera (PXWIRWFC): uses the RF868 radio to send
alarm notifications to the control unit and WiFi to send pictures to
the GSM module in the control unit . When the WiFi signal is weak or
there is no signal, it uses the RF868 channel as a back-up channel .
2-Control unit plus GPRS module (PXGPRS)
The GPRS module has the task of receiving the pictures from the
PIR camera via WiFi (PIR-WiFi Camera) or directly from the control
unit if the PIR camera uses the RF868 channel (PIR-868 Camera) .
Once the pictures are received, it uploads them onto the Came
cloud together with the information about the alarm event . Then it
sends an SMS to the user with the alarm data and the links to the
Came Cloud where the pictures are available .
If there is no cloud it can send an MMS with the information relating
to the alarm event and a photo attached .
Finally the module sends an email to two targets with the informa-
tion relating to the alarm and a photo attached .
A
B
C
D
- Remote access via Came Mobile app;
- Remote programming of the control unit via PXManager;
- Remote programming of graphics maps via Came D Sw .
Once authenticated on the CameConnect site, you must add your
own device [Add Gateway] A .
B Enter the key code present on the label inside the package .
C Assign a name to the gateway .
4 Enter a brief description of the gateway (optional) .
E Once registered, the device appears in our list of devices and it
is possible to manage it from CameConnect .
3-CameConnect
CameConnect has the task of storing the pictures and the informa-
tion relating to the pictures .

SERVICES

Saving pictures and sending SMS
To activate the service to save the pictures on CameConnect and
send SMS with the information relating to the alarm event and the
link to the pictures, you must:
B
A Activate the CameConnect service .
B Select [Services] [CameConnect] .
C Activate the SMS notification service and select the telephone
number to receive the notification . The telephone numbers are
those set in the control unit
E
A
C