Accessories
PXV64-PXV256
Installing the PXVxxx card means the following functions of the con-
trol unit can be enhanced:
without card
FUNCTION
voice synthesis
Voice guide
No
No
User codes
20
50
Transponder
20
50
keys
Events
250
999
memory
* Displaying more than 1,000 events is not available from the key-
pad, but only from the PC (download events)
TECHNICAL FEATURES
Power supply voltage [V DC]
Max . power draw [mA]
Operating temperature [°C]
Relative humidity without condensation [%[
Memory [Mbit]
INSTALLATION
All the operations to insert and remove the card must be car-
ried out with no power to the control unit .
The PXVxxx card must be inserted into the correct slot as shown
on the right .
PXGSM
Telephone dialler suitable for all Proxinet control units, complete
with stylus aerial . Allows SMS and voice messages to be sent and
SMS and DTMF commands to be received for remote control .
CIRCUIT BOARD DESCRIPTION
1 .
Connector for connection with control unit board .
2 .
SIM slot .
PXV64
PXV256
Yes
Yes
Yes
Yes
20
50
99
999
20
50
99
999
250
999
999
9999*
PXV64
PXV256
3 .3
10
-10÷40
25-75
64
256
3 . [DL1] Green LED indicating GSM operation:
GSM module off or not present .
Active call on GSM (outgoing or incoming) .
GSM telephone dialler not registered with GSM network .
GSM telephone dialler correctly registered with GSM
network .
4 . Connector for GSM aerial .
INSTALLATION
All the operations to insert and remove the interface must be
carried out with no power to the control unit .
⑥
③
⑤
④
Attach the aerial ① to the perspex protective ② terminal board cover,
then connect it to the PXGSM interface ③ and attach the latter with
the three mounts ④ provided, to the Control unit board ⑤ .
Connect PXGSM from connector ⑦ to connector CN2 ⑧ of the Con-
trol unit board .
Power the control unit and after at least a minute, check that the
green PXGSM DL1 LED ⑥ signals correct registration of the SIM with
slow flashes
.
⑦
②
⑦