Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CP0431
RIGHT SIDE
LEGEND
ITEM 1 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 2 = M10x1.25x130mm LONG HEX HEAD BOLT (x1).
ITEM 3 = M10 WASHERS (19mm OD) (x2).
ITEM 4 = LOCK-WASHERS (LW0001) (x2).
ITEM 5 = CRASH PROTECTOR (B0431 with CS341) (x2).
ITEM 6 = LHS BOBBIN SPACER (S0212) (x1)
ITEM 7 = M10x1.25x100mm LONG HEX HEAD BOLT (x1).
ITEM 8 = RHS BOBBIN SPACER (S1045) (x1)
ITEM 9 = OEM CONE SPACERS (Not supplied in the kit; for illustration purpose only)
ITEM 10 = OEM EXPANDING SLEEVE (Not supplied in the kit; for illustration purpose only)
ITEM 11 = MARKING TOOL (T0007) (x1).
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!
TOOLS REQUIRED
•
Socket set to include 4, 5, 6, 7 & 8mm A/F socket and wrench.
•
Socket set to include 17mm socket and wrench.
•
Flat head & Phillips screwdriver.
•
Thin nose pliers.
•
Torque wrench (up to 40N/m).
TOWARDS REAR
TOWARDS FRONT
OF BIKE
OF BIKE
PICTURE C
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
Table des Matières
