Technical Data - Heidolph SilentCrusher M Mode D'emploi

E
E
SilentCrusher M
Characteristics
Connection Voltage
Power Consumption (Rated Output)
RPMs
Operating Modes
Drive Protection
Control Light for "Device On"
Dimensions (in mm) Drive Unit
Retainer Rod
Dimensions (in mm) Power Supply
Total weight
Operating Temperature
Storage Temperature
Relative Humidity
Type of Protection according to EN
60529
Level of Protection according to VDE
0100
Dispersion Tool 6 F
Characteristics
Part Number
Stator Diameter [mm]
Rotor Diameter [mm]
Gap Width Generator/Rotor [mm]
Width of Slot [mm]
Total Shaft Length [mm]
Maximum Immersion Depth [mm]
Minimum Immersion Depth [mm]
Volume [ml]
Peripheral Speed [m/sec]
Initial Particle Size [mm]
Material
Sterilization
Dispersion Tool 8 F

TECHNICAL DATA

Values
100 – 230 V 50 / 60 Hz
130 W
5000 – 26000 rpm, referred to water
Short-term operation
Overheating protection switches drive unit
off in case of overheating; red control light
indicates this condition. Reset with start-
stop key.
CONTROL LIGHT (green) on power supply
Width 68; Height 160; Depth 75
10 x 100
Width 145; Height 43; Depth 75
1.9 kg
0 – 40 °C
- 20 to + 80 °C
85 % (without condensation)
IP 30
I
Values
596-06010-00
5,3
3,2
0,3
0,6
60
48
20
0,8-30
4,4
< 0,4
PTFE / 1.4435
Up to 130°C with wet chemicals; up to
180°C dry
- 50 -