ASM POSITAPE WB Serie Manuel De Montage Et De Mise En Service page 26

POSITAPE
®
Manuel de montage et de mise en service
Sortie CANopen
Examples
Example protocols are prepared using the IXXAT USB-to-CAN PC-Interface with CAN-Monitor „mi-
niMon" (IXXAT Automation GmbH, D-88250 Weingarten). These examples enable the user to con-
figure and to run the CANopen slaves from a host PC without using a CANopen master ECU. The
miniMon-screen has the configuration and status window at left side, a receive message window and
a transmit message window below.
Configuration Example 1 - screenshot
26 MAN-WB-F-16 © by ASM GmbH
www.asm-sensor.fr Tél.: +33 3 88 49 25 35