Error Codes; Options And Accessories - Hatco Flav-R-Savor FSD-1 Manuel D'installation Et D'utilisation

English

Error Codes

The following error codes may appear on the digital display to
indicate an error in the operating condition of the unit.
LO H20 = Low water probe does not detect water. Refill water
reservoir — refer to instructions in OPERATION
section of this manual.
E1 = Air temperature sensor malfunctioning. Contact an
Authorized Hatco Service Agent or Hatco for assistance.
E2 = Humidity temperature sensor malfunctioning. Contact an
Authorized Hatco Service Agent or Hatco for assistance.
dE-L = Water reservoir needs de-liming. Refer to the
"Removing Lime and Mineral Deposits" procedure
in the MAINTENANCE section of this manual to
clean and de-lime the water reservoir. Refer to the
"Setting the De-liming Detection Mode" procedure in
the MAINTENANCE section of this manual to set the
de-liming detection mode "on" or "off." Contact
Authorized Service Agent or Hatco for assistance.
Display Racks for FSD
Several display racks are available to "customize" FSD models to specific foodservice operations.
3-Tier Circle Rack*
Rack Openings: 4-5/8" (117 mm)
*Racks designed for use
with motorized display.
Display Racks for FSDT
Several display racks are available to "customize" FSDT models to specific foodservice operations.
4-Tier Circle Rack* Rack Openings: 3-1/2" (89 mm)
Rack Openings:
4-5/8" (117 mm)
5-Tier Circle Rack*
Rack Openings:
3-7/8" (98 mm)
Form No. FSDM-0119
3-Tier Pan Rack
Rack Openings: 3-1/2" (89 mm)
3-Shelf Angle Rack
Middle shelf is removable.
Rack shelves slant
at 15° angle.
TROUBLESHOOTING GUIDE
Troubleshooting Questions?
If you continue to have problems resolving an issue, please
contact the nearest Authorized Hatco Service Agency or Hatco
for assistance. To locate the nearest Service Agency, log onto
the Hatco website at www.hatcocorp.com, select the Support
pull-down menu, and click on "Find A Service Agent"; or contact
the Hatco Parts and Service Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: support@hatcocorp.com

OPTIONS AND ACCESSORIES

Shelf 1 Rack Opening: 2-1/2" (63 mm)
NOTE: Shelf 1 is the bottom shelf.
Shelves 2, 3, & 4 Rack Opening: 2-3/4" (69 mm)
Shelves 2, 3, & 4 are removable.
3-Tier Pretzel Tree*
Rack Openings:
5-7/8" (149 mm)
4-Tier Pan Rack
Rack Openings:
3-1/2" (89 mm)
15
5-Shelf Multi-Purpose Rack
7-Shelf Multi-Purpose Rack
Shelves 1 & 5 Rack Opening:
2-1/2" (63 mm).
NOTE: Shelf 1 is the bottom shelf.
Shelves 2, 3, 4 & 6 Rack Openings:
2-3/4" (69 mm)
Shelves 2, 3, 4, 6, & 7 are removable.
*Racks designed
for use with
motorized display.