Grundfos SMD Consignes De Sécurité page 15

• RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN IEC 63000:2018
• Machinery Directive (2006/42/EC).
Standards used: EN 809:1998+A1:2009
• Low Voltage Directive (2014/35/EU), applies only
products with sensor and relay:
Standard used: EN 61010-1:2010, EN
61010-1:2010/A1:2019
• Electromagnetic compatibility (EMC) Directive
(2014/30/EU), applies only products with sensor
and relay:
Standard used: EN 61000-6-3:2007 + A1:2011,
EN 61000-6-2:2005
• ATEX Directive (2014/34/EU)
Applies only to products with Ex II 2G ATEX
marking on nameplate.
Further information, see below.
Product
SMD
Notified body: Electrosuisse. No. 1258. Luppmenstrasse 1, CH-8320 Fehraltorf, Switzerland.
Manufacturer: Grundfos Holding A/S, Poul Due Jensens Vej 7, DK-8850 Bjerringbro, Denmark.
This EC/EU declaration of conformity is only valid
when published as part of the Grundfos safety
instructions (publication number 99231566).
th
Székesfehévár, 20 of May 2021
Róbert Kis
Technical Product Owner
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EC/EU declaration of
conformity.
Certificate No
SEV 17 ATEX 0103 X
Standards used
EN IEC 60079-0:2018, EN 60079-1:2014, EN ISO
80079-36:2016, EN ISO 80079-37:2016
197