Declaration of conformity
UK declaration of conformity
We, Grundfos, declare under our sole responsibility that the products to which the declaration below relates, are
in conformity with UK regulations, standards and specifications to which conformity is declared, as listed below:
Valid for products:
SMD, SMG, SFG
•
The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2019
Standard used: EN IEC 63000:2018
•
Supply of Machinery (Safety) Regulations 2008
Standard used: EN 809:1998+A1:2009
•
Electrical Equipment (Safety) Regulations 2016,
applies only products with sensor and relay
Standards used: EN 61010-1:2010, EN
61010-1:2010/A1:2019
•
Electromagnetic Compatibility Regulations 2016,
applies only products with sensor and relay
Product
SMD
Notified body: Electrosuisse. No. 1258. Luppmenstrasse 1, CH-8320 Fehraltorf, Switzerland.
Manufacturer: Grundfos Holding A/S, Poul Due Jensens Vej 7, DK-8850 Bjerringbro, Denmark.
This UK declaration of conformity is only valid when
accompanying Grundfos instructions.
UK Importer: Grundfos Pumps ltd. Grovebury Road,
Leighton Buzzard, LU7 4TL.
th
Székesfehérvár, 20
of May 2021
Róbert Kis
Technical Product Owner
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Manufacturer and person empowered to sign the UK
declaration of conformity.
10000335021
198
Certificate No.
SEV 17 ATEX 0103 X
Standards used: EN 61000-6-3:2007 + A1:2011,
EN 61000-6-2:2005
•
Equipment and Protective Systems Intended for
Use in Potentially Explosive Atmospheres
Regulations 2016
Applies only to products intended for use in
potentially explosive environments, Ex II 2G,
equipped with nameplate with ATEX marking and
the EU-type examination certificate. Further
information, see below.
Standard used
EN IEC 60079-0:2018, EN 60079-1:2014, EN ISO
80079-36:2016, EN ISO 80079-37:2016