Tools Required - R&G LP0121 Instructions

LEGEND
ITEM 1 = LICENCE PLATE BRACKET (TB0097) (x1).
ITEM 2 = UNDERTRAY (SMW0004 (x1).
ITEM 3 = M6x8mm LONG BUTTON HEAD BOLTS (BLACK) (x4).
ITEM 4 = LICENCE PLATE LIGHT ASSEMBLY (LA0002) (x1).
ITEM 5 = BULLET CONNECTORS FOR ITEM 4.
ITEM 6 = LIGHT SHROUD (LH0004) (x1).
ITEM 7 = CABLE CLIPS (x2).
ITEM 8 = REFLECTOR (x1).
ITEM 9 = INDICATOR ADAPTORS (I0027) (x4) FOR USE WITH MINI-INDICATORS R&G
PRODUCT CODE RG370.
ITEM 10 = M6 PENNY WASHERS (x7).
ITEM 11 =100mm LENGTH OF HEAT SHRINK (x3).
ITEM 12 = SPACER (S0490) (13mm long) (x1)
ITEM 13 = SPACER (S0491) (10.5mm long) (x1)
ITEM 14 = M6x20mm LONG BUTTON HEAD BOLT (x1)
ITEM 15 = M6x25mm LONG BUTTON HEAD BOLT (x1)
ITEM 16 = M6 NYLOC NUT(x1)
Please note that in cases where kits are packed with rubber washers holding the components onto
the bolt – the rubber washers should be thrown away!

TOOLS REQUIRED


Set of metric Allen keys to include 3, 4 and 2x5mm A/F sizes.

Electrical pliers/crimps.

Torx T20 and T25.

Water-pump pliers.

Small amount of super glue.

Socket set to include 10mm socket & wrench
PICTURE 1 PICTURE 2
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com