Completing The Installation - AVG COLORADO AVC-276PS Instructions D'installation

Connecting the exhaust system
Venting installations to the exterior
Connect the exhaust system to the discharge opening of the hood. Tighten the connection points with flanges.

Completing the installation

1. Re-install the grease filters. See ''Range Hood Care".
1. Plug the 3-pin power cord into the 3-prong grounded outlet located in the cabinet that is above the hood.
2. Check the fan hood and lamp. See "Using the hood" section. If the hood does not work, determine if a circuit
breaker has tripped or a household fuse has blown. Disconnect the power source and inspect the wiring
connections.
NOTE: To take full advantage of the new range hood, please read the section "Using the hood".
WARNING
Electrical Shock Hazard
Plug into a 3-prong grounded outlet.
Do not remove the connecting pin to the ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire or electric shock.
29