Table des Matières
Publicité
CP0432
RIGHT SIDE
LEGEND
ITEM 1 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 2 = M10x1.25x40mm LONG HEX HEAD BOLT (x1).
ITEM 3 = M10 WASHERS (19mmOD) (x3).
ITEM 4 = LOCK-WASHERS (LW0001) (x2).
ITEM 5 = CRASH PROTECTOR (B0063 with CS066) (x1).
ITEM 6 = M10x1.25x90mm LONG CAP HEAD BOLT (x1).
ITEM 7 = M10 WASHERS (16mmOD) (x2).
ITEM 8 = MOUNTING BLOCK LEFT INNER (M0524) (x1).
ITEM 9 = SPACER (S1049) (39mm LONG) (x1).
ITEM 10 = SPACER (S1080) (48.50mm LONG) (x1).
ITEM 11 = MOUNTING BLOCK LEFT OUTER (M0525) (x1).
ITEM 12 = M10x1.25x100mm LONG CAP HEAD BOLT (x1).
ITEM 13 = COVER PLATE (PLATE 0209) (x1).
ITEM 14 = M5x8mm LONG COUNTERSUNK BOLT (x1).
ITEM 15 = SPACER (S1051) (10.50mm LONG) (x1).
ITEM 16 = M10x1.25x60mm LONG HEX HEAD BOLT (x1).
ITEM 17 = MOUNTING BLOCK RIGHT (M0526) (x1).
ITEM 18 = M6 WASHERS (14mmOD) (x1).
ITEM 19 = M6x20mm LONG CAP HEAD BOLT (x1).
ITEM 20 = CRASH PROTECTOR (B0431 with CS341 & S0255) (x1).
ITEM 21 = M10x1.25x55mm LONG HEX HEAD BOLT (x1).
ITEM 22 = 35mm LENGTHS OF SELF-ADHESIVE FOAM (x2). ***NOT SHOWN***
ITEM 23 = 50mm LENGTH OF SELF-ADHESIVE FOAM (x). ***NOT SHOWN***
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt – the rubber washers should be thrown away!
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
Table des Matières
