In-bed length
Position 1 (Short)
Position 2 (Standard)
Position 3 (Extended)
Overall width
Height of mattress platform (centre of seat section to floor)
With 125mm castors
With 150mm castors
Head down tilt angle
Foot down tilt angle
Mattress size (refer to Chapter 3 for details)
Position 2 (Standard)
Mattress platform angles
End of life disposal
Equipment that has electrical and electronic components should be disassembled and
recycled per Waste of Electrical and Electronic Equipment (WEEE) or in accordance
with local or national regulation.
All batteries in the product must be recycled separately. Batteries are to be disposed in
accordance with national or local regulations.
Components that are primarily be made up of different kinds of metal (containing more
than 90% metal by weight) for example bed frame, should be recycled as metals.
Transportation and storage
Handle with care. Do not drop. Avoid shock or violent impact.
This equipment should be stored in a clean, dry and well-ventilated area which meets the
following conditions:
Temperature
Relative humidity
Atmospheric pressure
CAUTION
If the bed is stored for a long time, it should be connected to the electricity supply for
24 hours every three months to recharge the backup battery, otherwise it may become
unserviceable.
192cm
203cm
215cm
103cm
32cm to 76cm
34cm to 78cm
12° min.
12° min.
202cm x 88cm, 12.5 to 18cm thick
-10 C to 50 C
20% to 90% at 30 C, non-condensing
700hPa to 1060hPa
51