Adjusting The Calf Position - arjo Enterprise 5000X E5X Notice D'utilisation

Adjusting the calf position

When the thigh section is raised, the calf section can be manually
changed to the vascular (horizontal) position:
Hold the side of the calf section frame. Lift the calf section upwards until it
latches.
To return the calf section to the Fowler position:
Use the patient handset or ACP to lower the thigh section to the flat
position; then raise the thigh section again.
WARNING
Take care when lifting the calf section. Observe local manual handling guidelines.
Changing from Fowler position (left) to vascular
38