Mattress Platform Sections; Head And Foot Boards; Underbed Light (Optional); Adjusting The Mattress Platform - arjo Enterprise 5000X E5X Notice D'utilisation

Mattress
platform
sections
NOTE
Do not combine flat and curved platform sections. Curved sections are lighter in colour than
the dark grey flat platform sections to help differentiate between the two types.
Head and foot
boards
Underbed light
(Optional)

Adjusting the mattress platform

As standard the bed is supplied with curved platform sections. Optional
flat platform sections are available.
The four mattress platform sections (backrest, seat, thigh and calf) can
be removed by pulling them upwards off the mattress platform frame.
Lift off the calf extension sheet (1) before removing the calf section (2).
Mattress platform sections (top view)
To replace each section, make sure it is correctly positioned on the
mattress platform frame then press down firmly until it snaps into place.
Replace the calf extension sheet (1) by clipping it over the end of the
mattress platform frame.
The head and foot boards can be easily lifted off the bed for access to
the patient.
The underbed light illuminates the floor on either side of the bed.
The light is always on except when the bed is operating from the backup
battery.
The bed is provided with two control handsets: a patient handset with
basic controls only and a more comprehensive attendant control panel
(ACP) for use by the carer. The functions on both handsets are
described separately over the next few pages.
To adjust the mattress platform: press and hold the appropriate button
until the required position is achieved. Movement will continue until the
button is released or the limit of travel is reached.
2
32
1