Installation And Use - arjo Enterprise ENT-ACC11 Notice D'utilisation

Model ENT-ACC11 provides convenient storage for the nurse's handset (Attendant Control
Panel, ACP) on Arjo Enterprise® 5000X (E5X), 5000, 5100, 5200 and 5300 series beds without
integrated side rail controls.
Refer to the bed instructions for use to confirm compatibility before using this accessory.
Do not use the handset holder to push or pull the bed.
This accessory must not be installed at the head end of the bed.

Installation and use

Insert the base of the pole into the foot end socket (1) on the patient's left hand side of the bed,
with the retainer (2) on the outside of the socket as shown.
Slide the nurse's handset into the holder (3). The clip on the back of the handset (4) fits over the
holder to retain the handset in position.
Once placed in the holder the handset can be operated with one hand.
Ensure that the nurse's handset cable is not positioned where it could
become entangled in the wheels or bed mechanism.
Cleaning
For decontamination instructions, refer to the bed instructions for use.
Product weight
End of Life Disposal
Components that are primarily be made up of different kinds of metal (containing more than 90%
metal by weight) for example sling bars, rails, upright supports, etc., should be recycled as
metals.
WARNING
2
Caution
ENT-ACC11 = 0.8kg
1
EN
3
4