Wacker Neuson DPU 100-70Les Notice D'emploi page 38

7 Maintenance
Topping up with engine oil
Item
1
1. Fold up cover.
2. Remove dirt around the oil cap.
3. Unscrew and remove oil filler cap.
4. Keep pouring engine oil into the opening until the upper mark is reached on
the oil level dipstick.
See the chapter Technical data for the oil specification.
5. Screw in cover for oil filler cap, and tighten until hand-tight.
6. Wipe off any spilled oil.
38
All manuals and user guides at all-guides.com
Designation
Oil cap
Operator's manual
DPU 100-70Les