Wacker Neuson DPU 100-70Les Notice D'emploi page 37

DPU 100-70Les
7.2.2 Checking motor oil level and topping up engine oil
Checking the engine oil level
Item
1. Place the machine upright on a flat surface.
2. Remove any dirt around the oil level dipstick.
3. Pull out dipstick.
4. Wipe off dipstick with dry, lint free towel.
5. Fully insert dipstick.
6. Pull out dipstick.
7. Check whether the oil is between the lower and upper mark on the dipstick.
8. Fully insert dipstick.
All manuals and user guides at all-guides.com
Designation
1 Oil level dipstick
2 Mark
Operator's manual
7 Maintenance
37