Wacker Neuson DPU 100-70Les Notice D'emploi page 28

6 Use and operation
6.2 Starting up
Starting the engine
Item
1
2
3
4
5
1. Set the throttle lever to the full throttle position.
2. To turn the vibration off, press the vibration on/off switch.
Note: The engine starts only if the vibration is turned off.
3. Insert the key into the ignition lock and turn to the right.
4. Press the start button and do not let go until the engine is running.
5. Shift the throttle lever to the idle position.
6. Let the engine warm up for a few minutes
28
All manuals and user guides at all-guides.com
Designation
Start button
Vibration control lamp
Slow/fast operation button
Vibration on/off switch
Throttle lever
Operator's manual
DPU 100-70Les
Item Designation
6 Stand vibration/normal operation
switch
7 Charging control lamp
8 Oil pressure control lamp
9 Ignition lock