Air Filter System; Cleaning The Air Filter - Stihl MS 192 T Notice D'emploi

Chain type Chain pitch Minimum
groove depth
Picco 1/4" P 4.0 mm
Rapid 1/4" 4.0 mm
Picco 3/8" P 5.0 mm
Rapid 3/8"; 0.325" 6.0 mm
Rapid 0.404" 7.0 mm
If the groove is not at least this deep:
Replace guide bar
N
Otherwise the drive links will grind
against the base of the groove – the
bottoms of the cutters and the tie straps
will not lie against the bar.
MS 192 T, MS 192 TC
All manuals and user guides at all-guides.com

Air Filter System

The air filter system can be adapted to
suit different operating conditions by
installing a choice of filters. Changing
the filter is quick and simple.
The saw comes standard with either a
fabric filter or a fleece filter.
Fabric filter
For normal operating conditions and
winter operation.
Fleece filter
For dry and very dusty work areas.

Cleaning the Air Filter

If there is a noticeable loss of engine
power
Open the twist lock (1) in the
N
direction of the arrow.
Remove the carburetor box
N
cover (2).
Clean away loose dirt from around
N
the filter.
Remove the filter.
N
Knock the filter out on the palm of
N
your hand or blow it clear with
compressed air from the inside
outwards.
Always replace damaged filters.
N
If filter is caked with dirt:
Wash the sfilter with STIHL unversal
N
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
NOTICE
Do not clean a fleece filter (option) with
a brush.
English
25