Information Before You Start; Starting / Stopping The Engine - Stihl MS 192 T Notice D'emploi

English
Full-time professional every 3
usage: months
Semi-professional every 6
usage: months
20
All manuals and user guides at all-guides.com

Information Before You Start

The three positions of the Master
Control lever:
STOP
Stop 0 – engine off – the ignition is
switched off.
Normal run position F – engine runs or
can fire.
To move the Master Control lever from F
to n, press down the throttle trigger
lockout and squeeze the throttle trigger
at the same time.
Starting throttle position n – this
position is used to start a warm engine.
The Master Control lever moves to the
normal run position as soon as the
throttle trigger is squeezed.
Starting / Stopping the
Engine
Starting the Engine
Press the fuel pump bulb at least
N
five times – even if the bulb is filled
with fuel.
Push the hand guard (1) forward –
N
the chain is locked.
Press down the throttle interlock (2)
N
and squeeze the throttle trigger (3)
at the same time – hold both levers
in that position.
Move the Master Control lever (4) to
N
n and hold it there.
Now release the throttle trigger,
N
Master Control and trigger interlock
in that order. This is the starting
throttle position.
MS 192 T, MS 192 TC