Air Filter System; Cleaning The Air Filter - Stihl MS 260 Notice D'emploi

English

Air Filter System

The air filter system can be adapted to
suit different operating conditions by
installing a choice of filters. Changing
the filter is quick and simple.
The saw comes standard with either a
fabric filter or a fleece filter.
Fabric filter
For normal operating conditions and
winter operation.
Fleece filter
For dry and very dusty work areas.
30

Cleaning the Air Filter

If there is a noticeable loss of engine
power
Remove the carburetor box cover.
3
2
1
N Move the Master Control lever (1) to
the stop position 0
N Turn the twist lock (2) above the
rear handle 90° counterclockwise.
N Lift off the carburetor box cover (3)
vertically.
Removing the air filter
N Clean away loose dirt from around
the filter.
4
N Take out the screw (4).
N Remove the filter and separate the
two halves.
Cleaning the air filter
N Knock the filter out on the palm of
your hand or blow it clear with
compressed air from the inside
outwards.
If filter is caked with dirt:
N Wash the filter in STIHL special
cleaner (special accessory) or a
clean, non-flammable solution (e.g.
warm soapy water) and then dry.
Do not use a brush to clean the
fleece filter.
N Always replace damaged filters.
MS 260, MS 260 C