Air Filter System; Cleaning The Air Filter - Stihl MS 193 Notice D'emploi

Air Filter System

The air filter system can be adapted to
suit different operating conditions by
installing different filters. Changing a
filter is accomplished quickly and simply.
The saw comes standard with either a
fabric filter or a fleece filter.
Fleece filter
For normal operating conditions and dry
work areas.
Fabric filter
For extremely cold operating conditions
(e.g. in powder or drifting snow or frost).
MS 193 C

Cleaning the Air Filter

Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
2
3
1
Move the Master Control lever (1) to
N
F.
Open the twist lock (2) in the
N
direction of the arrow.
Remove the filter cover (3).
N
Clean away loose dirt from around
N
the filter.
Remove the filter.
N
Knock out the filter or blow it clear
N
with compressed air from the inside
outwards.
Always replace damaged filters.
N
If filter is caked with dirt:
Wash the filter with STIHL universal
N
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
NOTICE
Do not use a brush to clean the fleece
filter.
4
Place the filter (4) in position.
N
Fit the filter cover.
N
English
31