MINN KOTA Terrova Manuel Du Propriétaire page 13

9
o. Replace the four sideplate screws using a #3 or #2
Phillips screwdriver. Two of these screws will be
located on each side of the mount.
10
ITEM(S) NEEDED
#18 x 5
p. Take the Foot Pedal (Item #EE) and turn it over.
Put a Foot Pedal Pad (Item #18) in each of the
pad locations.
The pads are recommended when using the
NOTICE:
Foot Pedal on non-carpeted surfaces.
©2022 Johnson Outdoors Marine Electronics, Inc.
#EE x 1
INSTALLING THE TERROVA
Sideplate Screw Sideplate Screw
Foot Pedal Foot Pedal
Bottom Bottom
Foot Pedal Foot Pedal
Pad Placement Pad Placement
minnkotamotors.com | 13