Cleaning And Storage - gourmetmaxx TK-9346A4PQ1 Mode D'emploi

❐ Do not overfi ll the shaker and drinking cup. Fill the cup no higher than the marking.
❐ Always keep hold of the motor unit with one hand during preparation.
❐ The device must not be connected to the mains power when you attach the shaker and
drinking cup to the motor unit or when you detach it.
❐ The device must not be moved or transported while it is switched on.
❐ Do not use the device for longer than 1 minute without interruption. A cooling-down
period of 3 minutes must then be maintained.
❐ Never fi ll the device with boiling-hot food or liquids!
❐ In the blade attachment and in the lid for the shaker and drinking cup there is a sealing ring
which ensures that the cup does not leak. Before each use, check whether the sealing ring
is in the correct position.
1. Place the motor unit on a dry, even and fi rm surface. You may wish to place a non-slip mat
underneath the motor unit so that the surface is not damaged.
2. Pour the ingredients you want into the shaker.
3. Screw the blade attachment onto the shaker and drinking cup and check that it fi ts properly.
4. Turn the shaker and drinking cup over and place it with the blade attachment pointing
downwards into the motor unit. Make sure that the locking lugs on the motor unit rest
correctly in the two recesses of the blade attachment.
5. Hold the motor unit fi rmly with one hand and use your other hand to turn the shaker and
drinking cup clockwise until it locks in place.
6. Insert the mains plug into a properly installed mains socket that is easily accessible.
7. To switch on the device, press the on/off switch and keep it pressed. Always keep hold of
the motor unit with one hand during preparation!
8. To switch off the device, release the on/off switch.
9. Remove the mains plug from the mains socket.
10. Wait until the blades have come to a complete standstill before you remove the shaker and
drinking cup. For this turn the shaker and drinking cup anticlockwise.
11. Turn over the shaker and drinking cup and carefully unscrew the blade attachment.
12. Screw the lid onto the shaker and drinking cup.
13. Clean the blade attachment immediately after use. Do not allow any food residues to dry on.

Cleaning and Storage

CAUTION!
❐ Remove the mains plug from the plug socket before cleaning the device!
❐ Never immerse the motor unit in water or other liquids! Ensure that the motor unit, cable
or plug do not fall into water or become wet. There is the risk of an electric shock.
❐ Clean the accessories after every use to prevent the formation of germs. Do not allow any
food residues to dry on.
❐ Do not use corrosive or abrasive cleaning agents, rough sponges or knives to clean the
device. These can damage the surface.
All manuals and user guides at all-guides.com
14