Checking And Replacing The Wear Guard - Stihl FBD-KM Notice D'emploi

English
Checking and Replacing the
Wear Guard
Checking the wear guard
1
2
Check the wear guard (1) for
N
damage before starting the power
tool.
The wear guard must be replaced
N
as soon as the gearbox (2) (arrow)
becomes visible.
NOTICE
The gearbox may be seriously damaged
if you do not replace the wear guard in
good time.
14
Replacing the wear guard
3 3
Remove the cutting blade if
N
necessary – see "Replacing the
Cutting Blade".
Remove screws (3) with a standard
N
T 20 Torx screwdriver.
Fit the new wear guard (1).
N
Insert the screws and tighten them
N
down firmly.
Mount the cutting blade – see
N
"Replacing the Cutting Blade".
FBD-KM