Publicité
8 Assembling the Special Harvester
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH
" LED next to the
lights up blue six times.
®
The Bluetooth
radio interface on the battery
is deactivated.
8
Assembling the Special
Harvester
8.1
Fitting and Removing the Tines
8.1.1
Fitting the Tines
► Switch off the special harvester, push retaining
latch to position
and remove the battery.
1
2
► Screw the tine (1) into the rake (2) and tighten
it down firmly by hand.
► Use a 16 mm ring wrench to turn the tine (1)
another 1/8 turn.
8.1.2
Removing the Tines
► Switch off the special harvester, push retaining
latch to position
and remove the battery.
► Loosen tine with a 16 mm ring wrench.
► Unscrew the tine by hand.
8.2
Mounting the Machine Support
► Switch off the special harvester, push retaining
latch to position
and remove the battery.
1
2
► Position the left half of the machine support (2)
against the side of the cover.
► Fit the screw (1).
0458-704-9921-D
®
®
radio interface:
symbol
1
5
3
4
► Position the right half of the machine support
(4) against the side of the cover.
► Fit the screw (5).
► Insert and tighten down the screws (4) firmly.
► Tighten down the screws (1) and (5) firmly.
The machine support (2) need not be removed
again.
9
Adjusting Special Har‐
vester for User
9.1
Fitting and Adjusting the Carry‐
ing System
► Put on the shoulder strap (1).
► Adjust the shoulder strap (1) so that the cara‐
biner (2) is about a hand's width below your
right hip.
10 Removing and Fitting the
Battery
10.1
Inserting the Battery
1
2
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
10.2
Removing the Battery
► Place the harvester on a level surface.
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
English
1
2
27
Publicité
Chapitres
Dépannage
