Start Here - Bestop 56873 Instructions D'installation

Install Belt Seal
Section 4
Step 1
Wipe the edge of the body with the
50/50 Alcohol/Water solution with
the soft cloth.
Step 2
Start to remove the adhesive protective
strip and place the end of the Seal down
on the top edge of the body.
P10 - 56873 Rev. J 1121
Parts
Seal, Belt
Part #596.65
Qty. 2

Start Here

Tools
50/50 Alcohol
water Solution
Scissors
Installation Instructions - Trektop for Bronco 4 Door
Step 3
Soft Cloth
Continue removing the protective strip
from the seal as you place it along the
top edge of the body. When you reach
the tailgate opening, Clip the excess seal
with a pair of scissors.
Repeat these steps on left side of vehicle.
Page 10
© 2021 Bestop, Inc.