Bestop 56873 Instructions D'installation page 20

Section 12 for VEHICLES THAT CAME WITH A FACTORY SOFT TOP ONLY
Front of vehicle Front of vehicle
Install the Main Pivot Brackets (Part # 602.62
Right Side) and Part #602.63 Left Side)
using two (2) M8 X 1.25 X 38mm screws (Part
# 532.17) and four (4) Spacers (Part # 603.20).
Repeat this step on the left side of the vehicle.
P20 - 56873 Rev. J 1121
Tools
T50
Torx Driver
Installation Instructions - Trektop for Bronco 4 Door
Parts
Main Pivot Bracket Main Pivot Bracket
Left Right
Part #602.63 Part #602.62
Qty. 1 Qty. 1
Screw,M8 X 1.25 X 38mm Spacer, 5MM
Part #532.17 Part #603.20
Qty. 4 Qty. 8
T-50 Torx
Page 20
© 2021 Bestop, Inc.