Bestop 56873 Instructions D'installation page 32

Section 24 Attach Rear Halo Bracket to Roll Bar
Tools
T30
Torx Driver
Remove the bolt that mounts the
Speaker Pod to the Roll Bar.
P32 - 56873 Rev. J 1121
Place the Rear Halo Bracket between
the speaker Pod and The Roll Bar.
Installation Instructions - Trektop for Bronco 4 Door
Parts
Rear Halo Bracket Right Rear Halo Bracket Left
Part #601.50 Part #601.51
Qty. 1 Qty. 1
Replace the bolt that mounts the
Speaker Pod to the Roll Bar.
Repeat these steps on the left side of
the vehicle.
Page 32
© 2021 Bestop, Inc.