Bestop 56873 Instructions D'installation page 19

Section 12
Attach Main Pivot Brackets To Vehicle
Step 1
Remove the two (2) bolts shown in the
illustration and hold onto them. These
bolts will be reused in step 2.
P19 - 56873 Rev. J 1121
(HARDTOP VEHICLE)
Tools
T50
Torx Driver
Parts
Main Pivot Bracket Main Pivot Bracket
Left Right
Part #602.63 Part #602.62
Qty. 1 Qty. 1
Spacer, 5MM
Part #603.20
Qty. 4
Installation Instructions - Trektop for Bronco 4 Door
Soft Top vehicles on following page
Step 2
Front of vehicle Front of vehicle
Install the Main Pivot Brackets (Part # 602.62
Right Side) and Part #602.63 Left Side) using the
screws that were removed in step 1 and two (2)
Spacers Part # 603.20.
Repeat this step on the left side of the vehicle.
Page 19
© 2021 Bestop, Inc.