Bestop 56873 Instructions D'installation page 17

Section 11
Attach Door Rails
Step 1
Remove
Remove the bolts from the vehicle (two
from each side) and hold onto it. These
bolts will be reused in the next step.
Note:
Remember the place where the
fasteners were removed from.
P17 - 56873 Rev. J 1121
(HARDTOP VEHICLES)
Soft Top vehicles on following page
Front Door Rail Left
Part #599.99
Qty. 1
Spacer, 5.5MM
Part #603.20
Qty 2
Installation Instructions - Trektop for Bronco 4 Door
Tools
T50
Torx Driver
Parts
Front Door Rail Right
Part #599.98
Qty. 1
Step 2
Attach Front Door Rails to the vehicle using the
bolts that were removed from Step 1 and one (1)
5.5 mm spacers (Part # 603.20).
Leave fasteners loose at this time.
Repeat this step on the left side of the vehicle.
Page 17
© 2021 Bestop, Inc.