Bestop 56873 Instructions D'installation page 16

Section 10 Install Window Belt Retainers
Attach the Window Belt Retainer (Part #
599.94 right side) and (Part #599.95 left
side) to the vehicle body using two (2)
M8 x 24 mm Screws that were used to
attach the Hard Top to the vehicle or two
(2) M8 x 28mm bolts (Part # 534.24) and
one (1) M6 x 15mm screw (Part # 533.61).
Repeat this steps on the left side of the
vehicle.
P16 - 56873 Rev. J 1121
Tools
T30, T40
and T50
Torx Drivers
Installation Instructions - Trektop for Bronco 4 Door
Hardware
Belt Retainer Right
Part #599.94
Qty. 1
Screw,M8 X 1.25mm X 28mm SCREW, M6 X 1.0 X 15mm
Part #534.24 Part #533.61
Qty. 4 Qty. 2
T-40 Torx T-30 Torx
Page 16
Belt Retainer Left
Part #599.95
Qty. 1
© 2021 Bestop, Inc.