Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Section 13
Assemble Rear Halo Mounting Brackets to #3 Bow Assembly
2
1
Align the Rear Halo Mounting Bracket (Part # 599.39) to the
#3 Bow Assembly (Part #3 600.88).
2
Attach using two (2) M6 X 1.0 X 15mm screws (Part # 533.61).
Repeat this step on the other side of the #3 Bow.
P21 - 56873 Rev. J 1121
2
1
Installation Instructions - Trektop for Bronco 4 Door
Tools
T30
Torx Driver
Rear Halo Mounting
Bracket
Part #599.39
Qty. 2
Page 21
Parts
#3 Bow Assembly
Part #600.88
Qty. 1
SCREW, M6 X 1.0 X 15mm
Part #533.61
Qty. 4
T-30 Torx
© 2021 Bestop, Inc.
Publicité
Table des Matières
