Section 22
Install #2 Bow Control Linkage
Attach the #2 Bow Control Linkage (Part
#598.00) to the Upper Rear Door Rail then
to the #2 bow using two (2) of the Pivot
Knuckle Screws (Part #308.65).
Short leg of the Control Linkage
Note:
goes on the Upper Door Rail.
Repeat this step on the left side of the
vehicle.
P30 - 56873 Rev. J 1121
Installation Instructions - Trektop for Bronco 4 Door
Page 30
Tools
T30
Torx Driver
Parts
SCREW, Pivot Knuckle
Part #308.65
Qty. 2
T-30 Torx
#2 Bow Control Link
Part #598.00
Qty. 2
Short Leg
© 2021 Bestop, Inc.