Bestop 56873 Instructions D'installation page 28

Section 20 Attach Front Side Rails
P28 - 56873 Rev. J 1121
Tip
It will be easier lifting the fabric assembly
onto the vehicle with two people.
Lift the top assembly on top of the vehicle with the
side bows going towards the rear of the vehicle. Allow
the fabric and the rear halo to rest on the hood of the
vehicle while you attach the Side Bows to the Main
Pivot Brackets using one (1) Pivot Knuckle Screw (Part
#308.65).
Repeat this step on the left side of the vehicle.
Installation Instructions - Trektop for Bronco 4 Door
Tools
T30
Torx Driver
Parts
SCREW, Pivot Knuckle
Part #308.65
Qty. 2
T-30 Torx
Tip
Remove antenna to make access to the
right side of the vehicle easier.
Page 28
© 2021 Bestop, Inc.