Bestop 56873 Instructions D'installation page 27

Section 19 Install Control Linkage
Attach the Control Linkage (Part
#602.75) to the Front Side Rails using
two (2) of the #308.65 screws.
Repeat this step on the left side of the
assembly.
P27 - 56873 Rev. J 1121
To front of Fabric Assembly
Installation Instructions - Trektop for Bronco 4 Door
Tools
T30
Torx Driver
Parts
Control Linkage
Part #602.75
Qty. 2
SCREW, Pivot Knuckle
Part #308.65
Qty. 2
T-30 Torx
Page 27
© 2021 Bestop, Inc.