Bestop 56873 Instructions D'installation page 23

Section 15
Install the Side Bows to the Deck Assembly
Place the Top (Fabric Assembly) on a clean flat
surface and fold the fabric forward to expose
the #1 Bow (Molded part with the latches).
Attach the Side Bows (Part #600.82 right side)
and (Part #600.83 left side) using two (2)
M6x1.0x15 Screws. (Part # 533.61)
Repeat this step on the left side of assembly.
P23 - 56873 Rev. J 1121
Shown without fabric
Note:
The tabs on the Side Rails must
pointing up.
Installation Instructions - Trektop for Bronco 4 Door
Tools
T30
Torx Driver
Parts
Front Side Rail Right
Part #600.82
Qty. 1
SCREW, M6 X 1.0 X 15mm
Part #533.61
Qty. 4
T-30 Torx
Page 23
Front Side Rail Left
Part #600.83
Qty. 1using
© 2021 Bestop, Inc.