Publicité
Liens rapides
Installation Instructions
ZipRail Tonneau
Installation Tips
Before you begin installing this product, please read all the
instructions thoroughly.
For a smooth fit:
For easier installation, the top should be installed at a temperature above
70º F. Below this temperature, the fabric may contract an inch or more,
making it difficult to fit the vehicle.
It is normal for the fabric to contract and wrinkle when stored in the ship-
ping carton. Within a few days after installation, the fabric will relax and the
wrinkles will disappear.
Wash truck to make sure no dirt or abrasive materials are between your
Safety glasses should be worn at all
times when installing this product.
Tools
Safety
Glasses
Do not overload bed of truck. Stress on Tonneau could result in damage.
P1 - 18240 - Rev. A 1114
Installation Time
Skill Level
1 - Easy
Installation Instructions - ZipRail Tonneau
Vehicle Application:
Ford F150
09-Current 6.4' bed
Part Number: 18240
1/2 Hour
© 2014 Bestop, Inc.
Publicité
Manuels Connexes pour Bestop ZipRail
Sommaire des Matières pour Bestop ZipRail
- Page 1 Installation Time 1/2 Hour Safety Glasses Skill Level 1 - Easy Do not overload bed of truck. Stress on Tonneau could result in damage. Installation Instructions - ZipRail Tonneau P1 - 18240 - Rev. A 1114 © 2014 Bestop, Inc.
- Page 2 No sobrecargue la caja de la camioneta. La tensión sobre la cubierta Tonneau puede provocar daños. des dommages au tissu de vinyle. Ne surchargez pas la caisse du camion. Une trop grande tension sur le couvre-caisse pourrait l’endommager. Installation Instructions - ZipRail Tonneau P2 - 18240 - Rev. A 1114...
-
Page 3: Parts List
Part # 470.25.63.6 Attached to Cover Attached to Cover Clamps, Part Number 470.79, Qty - 6 Side Rail Assembly Qty - 2 Part # 509.38.73.8 Installation Instructions - ZipRail Tonneau P3 - 18240 - Rev. A 1114 © 2014 Bestop, Inc. - Page 4 (2) people to position it on the truck bed to avoid extreme pressure on the corners. Installation Instructions - ZipRail Tonneau P4 - 18240 - Rev. A 1114 © 2014 Bestop, Inc.
- Page 5 Section 2 Page 5 Install Clamps Hardware Step 1 Step 2 470.79 Installation Instructions - ZipRail Tonneau P5 - 18240 - Rev. A 1114 © 2014 Bestop, Inc.
- Page 6 Work to the opposite corner. Repeat on both sides. Installation Instructions - ZipRail Tonneau P6 - 18240- Rev. A 1114 © 2014 Bestop, Inc.
-
Page 7: Removing Cover
To fasten cover, repeat installation step 3. The rear rail can be used to help roll the cover up. Installation Instructions - ZipRail Tonneau P7 - 18240 - Rev. A 1114 © 2014 Bestop, Inc. - Page 8 Your Bestop product is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning and maintenance. Fabric: The fabric should be washed often using soap, warm water and a soft bristle brush Rinse with clear water to remove all traces of soap. Bestop recommends using Bestop Cleaner (part no.
- Page 9 Su producto Bestop está hecho con materiales de la más alta calidad. Para mantener su apariencia nueva y alargar su uso al máximo posible, necesitará limpieza y mantenimiento periódicos. Tela: debe lavar la tela con frecuencia usando jabón, agua tibia y un cepillo de cerdas suaves. Enjuague con agua limpia para eliminar todos los residuos de jabón. Bestop recomienda utilizar el Limpiador Bestop (número de parte 11201-00) y el Protector Bestop (número de parte 11202-00).
- Page 10 Votre produit Bestop est fabriqué des meilleurs matériaux disponibles. Il devra être nettoyé et entretenu régulièrement afin de maintenir son apparence neuve et pour une durée d’utilisation maximale. Tissu : Le tissu doit être lavé régulièrement à l’aide de savon, d’eau chaude et d’une brosse à soies douces. Rincer à l’eau claire afin d’éliminer toute trace de savon. Bestop recommande d’utiliser son Bestop Cleaner (pièce no 11201-00) et Bestop Twill Protectant (pièce no 11207-00) which qui sont spécialement formulés pour fournir un système complet de nettoyage et de protection.