Start Here - Bestop Trektop Instructions D'installation

Install Belt Seal
Section 4
Step 1
Wipe the edge of the body with the
50/50 Alcohol/Water solution with the
soft cloth.
Step 2
Start to remove the adhesive protective
strip and place the end of the Seal down
on the top edge of the body.
P11 - 56872 Rev. J 1121
50/50 Alcohol
water Solution

Start Here

Seal, Belt
Part #596.65
Qty. 2
Installation Instructions - Trektop for Bronco 2 Door
Tools
Step 3
Soft Cloth
Scissors
Parts
Page 11
Continue removing the protective strip
from the seal as you place it along the
top edge of the body. When you reach
the tailgate opening, Clip the excess seal
with a pair of scissors.
Repeat these steps on the left side of the
vehicle.
© 2021 Bestop, Inc.