Bestop 56873 Instructions D'installation page 35

Section 27 Install Quarter Window Retainer to Rear Halo to #3 Bow
Tools
T30
Torx Driver
Hardware
Retainer, Quarter Window Retainer, Quarter Window
Right Left
Part #599.88 Part #599.89
Qty. 1 Qty. 1
SCREW, M6 X 1.0 X 15mm
Part #533.61
Qty. 8
T-30 Torx
P35 - 56873 Rev. J 1121
Attach the Quarter Window Retainer Part #599.88
(Right) and Part #599.89 (Left) to the Rear Halo using
two (2) #533.61 Screws and to the #3 Bow using two
(2) #533.61 Screws.
Repeat this Step on the left side of the vehicle.
Installation Instructions - Trektop for Bronco 4 Door
Congratulations
You have finished installing the hardware.
Page 35
© 2021 Bestop, Inc.