Bestop 56873 Instructions D'installation page 18

Section 11 for VEHICLES THAT CAME WITH A FACTORY SOFT TOP ONLY
Step 1
Remove
Remove this bolt from the vehicle (one
from each side) and hold onto it. This bolt
will be reused in step 2.
P18 - 56873 Rev. J 1121
Tools
T50
Torx Driver
Parts
Spacer, 5MM
Part #603.20
Qty. 4
Screw,M8 X 1.25 X 38mm
Part #532.17
Qty. 6
T-50 Torx
Installation Instructions - Trektop for Bronco 4 Door
Step 2
Attach Front Door Rails to the vehicle using the
bolt that were removed from in Step 1and One
(1) M8 X 125 X38mm Screw (Part # 532.17) and
two (2) 5.5mm spacers (Part # 603.20).
Leave fasteners loose at this time.
Repeat this step on the left side of the vehicle.
Page 18
© 2021 Bestop, Inc.