Install Belt Retainer Foam
Section 9
Peel the protective strip from the back of the
Belt Rail Retainer Foam then place it on the
under side of the Belt Rail Retainer. Cut off
excessive foam with scissors.
Repeat this step on the left side Belt Rail
Retainer.
P15 - 56873 Rev. J 1121
Tools
Scissors
Installation Instructions - Trektop for Bronco 4 Door
Hardware
Belt Retainer Right
Part #599.94
Qty. 1
Belt Rail Retainer Foam
Part #615.71
Qty. 2
Page 15
Belt Retainer Left
Part #599.95
Qty. 1
© 2021 Bestop, Inc.