Before Initial Use; Unpacking The Items Supplied; Inserting / Removing The Handle Pole; Attaching/Removing Nozzles - Cleanmaxx T-110-80 Mode D'emploi

Before Initial Use

Unpacking the Items Supplied

CAUTION!
❐ Danger of suffocation! Keep the packaging material away from children and animals.
❐ Make sure that the device is not connected to the mains power before you attach or
detach the accessories.
Unpack all parts and check the items supplied for completeness (see the "Items Sup-
plied and Device Overview" chapter) and transport damage. If you fi nd any damage
to the components, do not use them (!), but contact our customer service department.

Inserting / Removing the Handle Pole

Notice: You can use the vacuum cleaner to clean fl oors with both the handle bar and
fl oor nozzle or as a hand-held vacuum cleaner with the tile nozzle to clean diffi cult to
reach areas.

Attaching/removing nozzles

CAUTION!
❐ Always switch the device off fi rst and pull the mains plug out of the plug socket be-
fore you attach or remove any accessories.
❐ When the device is switched on and the brush nozzle is in use, the brush rotates
in the nozzle. Please ensure that the device is standing upright on a suitable fl oor
covering which cannot be damaged by the brush. Do not lean on the device and
do not place it on furniture or uneven surfaces. Carry the device exclusively by the
carrying handle to move it.

Connecting the Crevice Nozzle / Brush Nozzle / Carpet nozzle

You can place the nozzles directly onto the device.
1. Mount the nozzles on the nozzle adapter behind the dust bin.
2. To remove the nozzles, simply pull them off.
• Slide up the release button for the handle
• Insert the handle pole into the receiving socket on the
brush vacuum cleaner.
• Release the release button for the handle pole to fi x the
handle pole in place.
• When you want to detach the handle pole, switch up the
release button nach oben and pull the handle pole up and
out of the brush vacuum cleaner.
19
pole.